Tuesday, August 16, 2011

Door again

There was a thread a while back about the wind blowing the door in this trailer shut and breaking the glass in it. I had intended to get some Plexiglas the last trip to Alpine, but after the fiasco with the border patrol I forgot half the stuff I planned on getting because of being PO'ed about that. Well I need to blame my forgetfulness on someone beside myself and the border patrol will do fine.  Anyway... I had an old mat that used to be used for a desk chair to be rolled around on. (Office type) so decided to cut a piece out of it the same size as the glass that was in it before it got broke. For now that's what I am replacing the glass with so as to get rid of the tape and tarp material over the hole and make it a little more secure and water proof to.
I think its probably made out of Lexan and has a rough texture something like the glass that got broken did so its opaque pretty much like that glass to.
Shown here is the tools used to do the trick with. The tin snips cut it just fine without breaking it which is one reason I think its was made out of Lexan. Plexiglas would have broken if cut like that. (Don't ask me how I know) I didn't have to worry about cutting the circular corners because the glass that got broken was also square and only the window frame has circular corners.
Used the only silicone I had to caulk it and it was black automotive silicone, but should hold up fine and If  I replace it later the silicone should come off pretty easy.

On the first post someone said when changing a window in an RV you just about needed four hands. Wasn't the case here because the outside part of the frame was taped to the door so it didn't try to fall out when I unscrewed all the screws from the inside. Once I got the inside frame off I caulked around the surface the glass is supposed to rest on and placed the new window material in it. Then I just replaced all the screws. Easy as pie.



8 comments:

  1. tffn - You're quite right. If you cut pexiglass you need to cut it with a circular saw.

    Glad you got your window sorted though :)

    ReplyDelete
  2. Dani, it can be scored and broken like glass which is the way its supposed to be cut, but I usually used a table saw to cut it. That didn't always work though because some times it would break anyway. Best to use a fine finishing blade rather than a course cut for wood blade. I really don't like the stuff and like Lexan much better. I personally think Plexiglas is obsolete.

    ReplyDelete
  3. Tffn,Don't go bangin your head on those little knobs if it has them on the one side for gripping carpet, that would hurt :) I was wondering if you could give me the number to rent a dungeon? Looks like I'm going to be needing one first of next month and would like to have things lined up before I get there! Thanks in advance!

    ReplyDelete
  4. Lance, here's the information you need.

    Terlingua Mini Storage
    Hc 70 Box 380, Terlingua, TX 79852
    (432) 371-2539

    If its still the same they rent for $85 a month and you have to pay up for three months to get one.

    ReplyDelete
  5. Nice repair job. The end result looks very professional.

    ReplyDelete
  6. Nicely done, David :) I have to make lists before I go shopping or I forget half of what I went for. Though sometimes I forget to bring the list, LOL

    ReplyDelete
  7. Allen, I think it will do ok for a while or maybe even permanent. Sure beats the tape and tarp method.

    Abby, Most of the time it doesn't do me any good to make a list because I either forget I have the list or overlook some of the stuff on it.

    ReplyDelete

Note: Only a member of this blog may post a comment.